Sheetrock & Drywall Installation in Litchfield County, CT

Flat, smooth walls and ceilings that are ready for paint. We hang, tape and finish drywall across Litchfield County and nearby Fairfield County.

Contractors Installing Drywall Panels for Home Remodeling Project
Hand Sanding Wall for Home Remodeling Preparation
Since 2006

family-owned

Est. 2006

Family-owned & operated

25+ years

Hands-on carpentry experience

CT & NY

Licensed contractor

One crew

Site prep to final walkthrough

Drywall in Litchfield County

Smooth, Seamless Drywall Installation for Your Home

Good drywall disappears. Bad drywall shows up in raking light, as seams, ridges and nail pops, and no amount of paint fixes it.

Most of the work happens after the boards go up. Taping, three coats of compound and sanding between coats are what make the wall flat. We take the time to do it right, and we do the paint afterwards if you’d like.

Projects we do drywall for:

Older Litchfield County houses often have plaster walls. Patching plaster with drywall is common, and getting the transition invisible takes care. We’ll tell you if a wall needs a skim coat or a full replacement.

Request your free estimate

We typically respond within one business day.

Your information is only used to respond to your request.

Our Drywall Installation Process, Step by Step

Check the framing

We look for studs and joists that are out of plane. Shimming now saves flaws later.

Hang the boards

Boards go up with the right fasteners and spacing. Ceilings go first, then walls. In baths and wet areas we use moisture-resistant board, and fire-rated board where code calls for it.

Tape and first coat

Seams are taped and the first coat of compound is applied over seams and screws.

Second and third coats

Each coat is wider and thinner. Compound needs time to dry between coats.

Sand

We sand smooth and check the walls with a light held at an angle, where flaws show.

Prime and paint

A primer seals the compound so paint dries evenly. We can paint if you’d like.

Wooden Frame of Home Addition Under Construction by Contractors
Newly Installed Wooden Flooring in Residential Entryway by General Contractor Services
Clear scope
Realistic schedule

Factors That Affect Your Drywall Finish Quality

01
Level of finish

Different rooms call for different finishes. Walls under glossy paint or strong light need the smoothest finish.

02
Drying time

Compound dries slowly in humid weather. Rushing coats causes cracks and shrinkage.

03
Dust

Sanding makes a lot of dust. We contain it where we can, but expect to wipe things down.

04
Repairs

Patches need to be feathered out well beyond the hole, or they show as a bump.

If drywall is part of a larger remodel, we can schedule it with the other trades so the room goes from framing to painted without delays.

Questions

Common Questions About Sheetrock Installation

Anything else? Call (203) 519-2650 and you’ll talk to the team that does the work.

A room or two takes several days because of drying time between coats. A whole addition takes longer.

Yes, once the leak is fixed. We cut out the damaged area, replace it and finish it so it blends in.

Yes. Holes, cracks and seams can be patched and painted.

Yes. Sheet rock is a common name for drywall, which is also called gypsum board.

Yes. We can prime and paint after finishing the drywall.

Yes. We work across Fairfield and Litchfield County, including Brookfield, Bethel, Danbury, Monroe, Ridgefield, New Milford and Woodbury.

Request a Free Sheetrock Installation Estimate

Repairs, remodeling, additions or a new build. Call or send the form and we’ll set up a free estimate.

Call CDL Contractors LLC